BP-150 has built-in three sets of 48V/2AH rechargeable batteries. There are three selection of output DC voltage : 50V, 100V, 150V. The maximum output current is 2A, the maximum output power is 300W. The external fuse is easy for replace. BP-145 supports multiple units in series or in parallel, provides low power and higher power output requirements. It is a very flexible combination of power products.
The use efficiency reaches more than 95%
Integrated aluminum alloy metal chassis, the side panel adopts advanced anti-vibration ring design, it is firm and reliable
The output voltage is adjustable, and the input and output voltages are visualized. Multiple units can be used in series or in parallel
Using MCU to control the switch of the output voltage, realize the soft switch of the power part of the power supply, and reduce the frequent impact damage of the hard switch to the mechanical switch
1、Adjustable output three DC voltage: 50V/100V/150V, maximum output current 2A
2.、Built-in three sets of 48V/2AH storage batteries, which cannot be used with external batteries.
3.、Support multiple BP-150 to be used in series or in parallel to provide greater output power.
4.、The output has its own fuse, which can protect the battery pack from short-circuit of the external load.
5.、High-efficiency battery efficiency, the use efficiency of the battery pack is almost 100%.
6.、The input voltage and output voltage are displayed on the LED screen, which can monitor the voltage of the internal battery module and the external output voltage in real time.
BP150 Parameters | |
Weight | 12.7kg |
Dimensions | 265*200*295mm |
IP Rating | IP65 |
Maximum Current | 2A |
Output Mode | Constant pressure |
Working Temperayure | -10℃/+50℃ |
Storage Temperature | -10℃/+60℃ |
Charging Voltage | 120-250V A.C |
Internal Battery | Lead-acid batteries |
Battery Capacity | 144V/2AH |
Industry-leading geophysical equipments and service provider supplier
